Western Australia Solar Subsidies may be cut – Wyatt

Western Australia Solar Subsidies look like they’re in the firing line right now – with Energy Minister Ben Wyatt advising that he supports either completely scrapping or winding back rooftop solar panel subsidies.

Western Australia Solar Subsidies

Western Australia Solar Subsidies - Synergy
Western Australia Solar Subsidies – Synergy (source: synergy.net.au)

Earlier this year the Australian Competition and Consumer Commission called to axe rooftop solar subsidies Australia-wide by 2021. Ben Wyatt said he has asked the Public Utilities Office to have an in depth look about the buyback scheme which could probably do with a bit of an overhaul, or at least a step in the right direction, technology wise.

“While the cost of solar PV systems has reduced significantly since the introduction of the Renewable Energy Target and is now considered economically viable in the absence of government subsidy, the implications of such a change need to be fully thought through, including the impact on the local solar industry,” Mr Wyatt said.

In WA, Synergy currently pays a feed-in tariff of 7.1c/kW to 240,000 households with solar – and over 70,000 customers entitled to the premium solar feed-in tariff which is 40c/kW (there’s no indication that the gov’t is looking at winding back the premium FIT). This is known as the Renewable Energy Buyback Scheme (REBS). Mr Wyatt said that Synergy are paying ‘over the odds’ for this power during hte middle of the day, when demand is low and output high. If you’d like to learn more about WA’s unique energy situation please have a look at this article.

We’re all for furthering the cause of solar, but is it worth taking a look at maybe moving some of the subsidies and tariffs towards energy storage rather than energy generation?

Ray Challen, who was the top energy adviser as the head of the Public Utilities Office up until the end of last year, said he thinks it’s time to consider the best way to continue improving our renewable generation:

“The reason for subsidising any form of behaviour is to produce some sort of greater social good, and it would be difficult to say at the moment that there is a greater social good from subsidising small-scale solar because people could do it anyway,” Mr Challen said. “Not only that but if you wanted to subsidise anything in the power sector then you would be probably subsidising batteries.”

So will we have a solar battery subsidy? It’s hard to say at this point, but many people are talking about making a change to the way we currently reward solar generators. Would a carefully managed solar battery rebate help? Watch this space…

Read More Solar News:

Senec.Home Intelligent Energy System in Australia

German company Senec has been shipping its products to Australia since early last year, and today we will take a look at the Senec solar battery range – according to the site one of these systems can increase your power self-sufficiency to 80% or more. Let’s take a look and see how they stack up against some of the other solar battery competitors. 

The Senec.Home Smart Energy Management System

Senec Solar Battery
SENEC.Home (source: SENEC)

Energy storage technology has been coming along in leaps and bounds lately – we’ve seen the standard lithium-ion swapped out with hydrogen, perovskite, zinc bromine and other materials. These batteries are lithium ion based as it still remains the most mature technology but it’s important to keep an eye out to see what’s around the corner. Who knows where the tech will take us! 

The Senec.Home is an ‘all in one’ system which includes a Senec inverter, a battery management system and battery modules. You need to manage the solar panels yourself, so make sure you have that planned out before you go and buy everything! Ask your retailer if there’s a good synergy between the system you’ve chosen because it’s an expensive exercise to try and swap or add more solar panels to an existing installation.

Here are some of the benefits of this system:

  • Engineered for 12,000 recharging cycles. This is double the capacity of its unnamed ‘nearest competitor’ (not the Tesla Powerwall 2 as it’s rated for ‘unlimited’ cycles)
  • The SENEC.Home Li system is an automated management system for the panels + battery. It manages your power needs without you doing a thing.
  • Australian service and support, but designed, manufactured and assembled entirely in Germany (except for the Panasonic battery modules).
  • Panasonic manufactured battery with 2.5kWh, 5.0kWh, 7.5kWh, and 10.0kWh options (“depending on the loading and unloading conditions”).
  • 98% maximum battery efficiency. 
  • Soon they’ll have a backup function so the Senec.Home can work when the grid goes down.
  • Up to four units can be daisy-chained to create your own microgrid.

After hosting a product launch last year for the system, it looks like demand for the product has been quite high. The price varies depending on a few factors so please get in touch with your retailer to discuss specifics. 

Click here to download the SENEC Intelligent Energy System Brochure and Specs.

If you’re interested in getting in contact, try  (08) 6280 1206 or  (+618) 6280 1206 if you’re not in Australia. Otherwise you can visit their site by clicking here

Have you got any experience or feedback with installing, buying, or running these systems? Please let us know about how you’re finding it in the comments. 

Read More Solar News:

Red Earth Energy Storage – Product Overview

Red Earth Energy Storage are a Brisbane based company supplying sealed VRLA (lead acid) energy storage modules. They offer three different types of battery depending on whether you need to be grid connected or not. The batteries are modular up to 25kW and all have a five year warranty. Let’s take a further look at their storage options below!

Red Earth Energy Storage

The Red Earth Lead Acid based products can accommodate sizes from 200Ah to 1000Ah. Depth of discharge has a large effect on the lifespan of a lead acid battery – so you should take note of the recommended depth of discharge for your battery – discuss this with the RedEarth engineering staff before you place your order so you know how to get the most out of your battery. But have a look at the image below (provided by RedEarth) for a basic understanding of what you can expect depending on the battery size on your system.

Red Earth Energy Storage Lead Acid VRLA Battery Depth of Discharge Chart
Redearth Lead Acid VRLA Battery Depth of Discharge Chart

Let’s take a look at their three different product lines:

M Series

RedEarth M Series
RedEarth M Series

The M Series provides up to 10kWh of usable storage at 8kW. They offer up to 8kW / 12kW peak via lead acid sealed VRLA batteries (8 x 6V VRLA gel). If you prefer they do have lithium or zinc bromide options. 

  • 5 Year Replacement Warranty
  • Full Remote Monitoring and control via 3G/4G/Wifi
  • On/Off Grid
  • Under eves footprint – no need for battery room or concrete slab. Maintenance free.

Click here to download the M Series Fact Sheet.

S Series

RedEarth S Series
RedEarth S Series

The S Series are an 8kW off-grid electricity storage system that offer up to 3kW / 4.8kW peak via sealed VRLA batteries (8 x 6V VRLA gel up to 443Ah). If you prefer they do have lithium or zinc bromide options. 

  • 5 Year Replacement Warranty
  • Full Remote Monitoring and control via 3G
  • Weatherproof, standalone system which can manage multiple power sources.
  • Modular
  • 650kg

Click here to download the S Series Fact Sheet.

L Series

RedEarth L Series
RedEarth L Series

The L Series is a weatherproof standalone battery system to manage multiple power sources, loads and batteries. It is an on grid or off grid solution and provides up to 33kWh of storage at 8kW/12kW peak via 24x 2V VRLA gel lead acid batteries.  

  • 5 Year Replacement Warranty
  • Hybrid or Standard storage system.
  • Modular – scope up as needed. 
  • Full Remote Monitoring and control via 3G/4G/Wifi

Click here to download the L Series Fact Sheet.

If you’re interested in or have any questions about any of these products please contact us or click here to visit their website.

Read More Solar News:

sonnenProtect 1300/2500 blackout protection

A big week for German battery manufacturing company sonnen who have announced the sonnenBatterie Protect 1300 – also known as the sonnenProtect. This smart device links with an existing sonnen solar battery and detects mains power outages – at which point it quickly and safely switches you across to use your battery storage for selected appliances. They also have the sonnenProtect 2500, which comes with 2.5kW of power output as opposed to the 1.3kW the 1300 offers. 

A common misconception about solar+storage is that you’ll have power during a blackout. Without something like the sonnen Protect this isn’t the case. 

sonnenProtect aka Sonnen Protect 2500
sonnenProtect aka Sonnen Protect 1300/2500 (source: sonnen)

sonnenProtect 1300, 2500 – Sonnen Protect

The sonnen Protect is installed close to the battery system and offers up to 1.3kW of power output (i.e. you can’t run a bunch of air conditioners off it but it’ll keep a modern fridge up and keep your lights on, run a laptop, charge your phone, run fans, etc.). It will give you a single protected power point – from here, depending on your budget, you can use extension cords and plug boards through your house, run cables to defined backup power points, or even run new cables in your walls to defined power points. Keep in mind that with the current option each power point will be limited to 2.5kW load or 1.3kW with the sonnen 1300.

The device can be retrofitted to all existing sonneBatterie Eco models, which are modular and start at just 2kWh up to 16kWh in the same cabinet. You can chain multiple cabinets together if you need more than that. 

sonnen made the news last year with their ‘free power’ offering via the sonnenFlat service, so this is another great offering from a renewable energy giant (they are the world’s largest home storage battery company)

Sonnen Protect Specifications, Size, Price

  • 15cm wide
  • 19cm high
  • 12cm deep
  • 800grams

Depending on what sort of solution you’d like (with regards to power points and running new wires in the walls), the install for a sonnenProtect 2500 is generally under $1,000 AUD.

If you’re interested in the sonnenProtect for your house please shoot us an email at [email protected] or fill out the form to your right and we’ll be in touch.

Download sonnenProtect 1300 datasheet (click here to download)

Download sonnenProtect 2500 datasheet (click here to download)

Download sonnenProtect 2500 Operating Instructions (click here to download)

Read More Solar News:

Reposit Power and their Virtual Power Station

Canberra-based renewable energy startup Reposit Power are predicting their client base will double within a year, and hope to have their technology in 5,000 homes by 2020. Their ‘virtual power station’ model is one we’ve seen before (Enova’s community solar, AGL’s virtual power plant which is in advanced stages of trials), but we’re excited to see how Reposit’s system works. Anything that helps improve baseline power is great for Australian energy as a whole. 

Reposit Solar, the Reposit Box, and ‘Grid Credits’

Reposit Power Control Diagram
Reposit Power Operation Diagram (source: repositpower.com.au)

Reposit Power have a ‘smarter, more intuitive way’ to control energy usage. According to their site, it typically costs approximately 4-6% on top of solar + storage, but these batteries will then be paid off in half the time as standard solar + storage. 

The system learns your energy usage patterns to feed back into the grid at optimum times. Every GridCredit you feed back into Reposit’s virtual grid represents a dollar off your bill – and the system automatically trades excess energy for GridCredits when the demand is at its highest. 

The system also uses advanced weather models to predict solar usage, factors in peak/offpeak tariffs, and will even charge your system overnight from the cheaper tariffs if it detects a probably energy shortfall for the next day’s peak hours.  It has an app which will display all information you need to know about the system, how much you’re saving, and how many GridCredits you are earning. 

Reposit Power Compatible Batteries

There are currently eight Reposit compatible batteries – they are available ‘pre-integrated’ from leading vendors or you can 

  • LG Chem Resu 6.4kWh
  • LG Chem Resu
  • LG Chem Resu HV
  • Fronius Solar Battery
  • GCL e-KwBe
  • Pylontech
  • Tesla Powerwall 1
  • Samsung All in One ESS

Reposit Power & Tesla Powerwall 2 Compatibility

Please note that there are no GridCredits on the Tesla Powerwall 2 as they won’t integrate with cloud / Internet only based control systems – given that it wouldn’t be able to function correctly if the Internet was unavailable. Since the Powerwall 2 is tremendously popular, this is a serious blow to Reposit Power’s ‘virtual power station’ – wonder if they’ll figure out a way to rectify this before the Tesla Powerwall 3 announcement

If you want to read more about Reposit’s choice to not integrate with these cloud control systems please click here to read a detailed post on their website. 

If you want to understand Reposit’s system please view the video below! 

Read More Solar News: